How To Fix Roof Leaks.

Home DIY

It's only fair to share...Email this to someone
email
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
Print this page
Print
Share on Tumblr
Tumblr

The roof is subject to a lot of tear and wear because it is exposed to a lot of external factors. This is why it is usually among most homeownerâs maintenance lists. The good news is that some issues, such as roof leaks, can be handled without necessarily having to call a professional. Roof leaks are common issues in most homes. Identifying the source of the leak is, however, difficult, not unless you do a thorough inspection to determine where the leak comes from. If you notice a roof leak, it is possible to fix the issue. However, if the damage is intense, it is advisable to call a roofer to do it for you. Below are some of the steps to repair a leaking roof.

When you determine that your roof is leaking, the first thing that you need to do is to find the leak. Note the location and then go outside and try to find the leak. If you have a good pair of binoculars, use them. Inspect to see whether you will see any missing or cracked shingles. Since leaks can occur anywhere, it is good to check every area, including the tent-shaped shingles that generally cover the triangular peaks of the roof.

If you notice curled shingles, you need to secure them because failure to do this may result in more leaks. One way to secure curled shingles is by brushing asphalt roofing cement onto that area. Use a generous amount on the underside of the shingle to ensure that the edges and corners of the shingles are secured. Finish by pressing firmly to allow it to set correctly.

In case you notice missing or cracked shingles, you need to replace them. Replacing damaged shingles helps to solve the issue of leaky roofs. If you want to remove a damaged shingle, start by lifting the edges of the surrounding shingles. Remove the nails using a pry bar. This should automatically cause the shingle to slide out. When replacing the new shingle, use a utility knife to first round the back corners. Doing this makes it easier for you to slide the new shingle and align it with the existing ones. Try to secure the shingle with nails in each corner. Lastly, use cement to cover the nail heads and then smoothen any overlapping shingle edges.

If your roof material is made of asphalt shingles, it is pretty easy to fix any roof leaks that may occur. In case you experience roof leaks, consider the above options.